Quantum Audio DDS-4 Guia do Utilizador descarregar pdf (Página 38)

Troubleshooting and Removal/Replacement Procedures

3–3

H/W Path Class Description

============================================

8 bc I/O Adapter

8/0 ext_bus GSC built-in Fast/Wide SCSI Interface

8/0.0 target

8/0.0.0 disk QUANTUM LPS1080WD

8/0.5 target

8/0.5.0 disk DEC DSP3210SW

8/0.6 target

8/0.6.0 disk DEC DSP3210SW

8/12 ba Core I/O Adapter

8/12/5 ext_bus Built-in SCSI

8/12/5.3 target

8/12/5.3.0 tape HP C1537A

8/12/5.4 target

8/12/5.4.0 disk SEAGATE ST3600N

8/12/5.6 target

8/12/5.6.0 disk MICROP 2112

10 bc I/O Adapter

10/12 ext_bus GSC add-on Fast/Wide SCSI Interface

10/12.4 target

10/12.4.0 disk SEAGATE ST31200W

Checking the Hardware Installation

Perform the following steps to check the hardware installation:

CAUTION: The DDS-3 drive is susceptible to mechanical and electrostatic

shock. When handling the drive, always wear the static strap that

came in the DDS-3 drive kit. Always handle the drive carefully.

1. Check that the SCSI-2 terminator is connected to the single-ended SCSI-2 port on

the rear I/O panel of the system unit (if there are no external SCSI-2 devices), or

that the last external single-ended SCSI-2 device is terminated.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 50 51

Sem comentários

Quantum Audio DDS-4 Guia do Utilizador Página 38